Sheetfed Polyethylene Compound
ULTRAPOLY™ 210 A is a high performance blend of tough, low COF polyethylene dispersed in a hard-drying binder. ULTRAPOLY™ 210 A is recommended where abrasion, mar resistance, and slip are required. ULTRAPOLY™ 210 A is 100% non-volatile and fast-setting. It protects the film in the earliest stages of the printing process while developing exceptional toughness over time.
ULTRAPOLY™ 210 A is coatable and may be used for laser work when combined with PTFE. For optimum heat resistance, we recommend using 3 parts ULTRAPOLY™ 210 A to 1 part FLUORON™ 735 A (a PTFE concentrate). Recommended use level is 4 to 6%.
| Property | Value | Test method / Standard |
|---|---|---|
|
Grind
|
N-0
|
NPIRI Gage units |
|
Peppering
|
N-5
|
NPIRI Gage units |
|
Color
|
Light yellow
|
|
|
Body
|
Creamy paste
|
|
|
Bio-Renewable Content
|
58%
|
Theoretical calculation |
ULTRAPOLY™ 210 A is shipped in 350 lb drums.
Shelf life from date of production is approximately 12 months. The product should be stored at temperatures ideally between 10 and 30°C (50-86°F).
The packaging should be kept tightly closed and stored in dry conditions.
An increase in viscosity or skinning is possible if the wax compound is stored in wrong conditions or left exposed to air for an extended period of time.
Product carbon footprint calculated in line with ISO14040 standard is available upon request.
Get in touch with us about this product
For more information, please contact your sales or technical representative.